What Hardware Do I Need?

Valves are supplied with all the necessary hardware for their configuration as ordered, and are shipped installed on the proper actuator, aligned and ready to use. Usually the configuration can be changed in the field from closemount to standoff, or from manual to air or electrically actuated. If you need to make such a change, you will find the necessary parts in this section.

I want: I have: I need to order:
A valve on an actuator with a standoff assembly No valve or actuator
  • The entire actuator assembled on a Valco or Cheminert valve. (Don't order the part separately.)
A valve
  • Actuator with standoff assembly already installed
A valve on an actuator with closemount hardware
A valve, an actuator, and a standoff assembly but no way to attach them
  • Clamp ring and screws (When you select an actuator type from the standoff page, the subsequent page will also include information on appropriate screws and clamp rings.)
A valve on an actuator with closemount hardware A manual valve
  • Actuator with closemount already installed
A valve on an actuator with a standoff assembly
A valve that I can turn by hand, on a standoff A valve, a standoff assembly, but no knob or retainer
A Valco W or UW valve that I can turn by hand, with closemount hardware A valve with no hardware
A valve and standoff to turn in a 90° angle from the actuator, so it will all fit A valve and an actuator that won't fit where I need to install it