Pre-Cut Natural PEEK Tubing

natural peek tubing

PEEK tubing has the strength required to withstand continuous use at HPLC pressure without swelling or bursting, and is not affected by halide salts, high strength buffers, or other aggressive mobile phases that corrode stainless steel. The polymer surface will not leach metal ions into the eluent or extract metal-sensitive components from the sample. Note however that dichloromethane, THF, and DMSO may cause swelling in PEEK, and concentrated nitric and sulphuric acid will attack PEEK.

Select an OD below to view product numbers:

360 µm OD

1/32" OD

1/16" OD

1/8" OD

360 µm OD PEEK tubing

Tubing ID psi* Feet Product No. Meters Product No.
.002" 5200 10 feet TPK.102-10FT 5 m TPK.102-5M
25 feet TPK.102-25FT 10 m TPK.102-10M
100 feet TPK.102-100FT 25 m TPK.102-25M
.003" 5000 10 feet TPK.103-10FT 5 m TPK.103-5M
25 feet TPK.103-25FT 10 m TPK.103-10M
100 feet TPK.103-100FT 25 m TPK.103-25M
.004" 4400 10 feet TPK.104-10FT 5 m TPK.104-5M
25 feet TPK.104-25FT 10 m TPK.104-10M
100 feet TPK.104-100FT 25 m TPK.104-25M
.005" 4000 10 feet TPK.105-10FT 5 m TPK.105-5M
25 feet TPK.105-25FT 10 m TPK.105-10M
100 feet TPK.105-100FT 25 m TPK.105-25M
.006" 3500 10 feet TPK.106-10FT 5 m TPK.106-5M
25 feet TPK.106-25FT 10 m TPK.106-10M
100 feet TPK.106-100FT 25 m TPK.106-25M

* Recommended maximum permanent working pressures calculated
  from the burst pressure and the factor 2.5

Top top

1/32" OD PEEK tubing

Tubing ID psi* Feet Product No. Meters Product No.
.002" 6600 10 feet TPK.502-10FT 5 m TPK.502-5M
25 feet TPK.502-25FT 10 m TPK.502-10M
100 feet TPK.502-100FT 25 m TPK.502-25M
.003" 6600 10 feet TPK.503-10FT 5 m TPK.503-5M
25 feet TPK.503-25FT 10 m TPK.503-10M
100 feet TPK.503-100FT 25 m TPK.503-25M
.005" 6000 10 feet TPK.505-10FT 5 m TPK.505-5M
25 feet TPK.505-25FT 10 m TPK.505-10M
100 feet TPK.505-100FT 25 m TPK.505-25M
.007" 5600 10 feet TPK.507-10FT 5 m TPK.507-5M
25 feet TPK.507-25FT 10 m TPK.507-10M
100 feet TPK.507-100FT 25 m TPK.507-25M
.010" 4900 10 feet TPK.510-10FT 5 m TPK.510-5M
25 feet TPK.510-25FT 10 m TPK.510-10M
100 feet TPK.510-100FT 25 m TPK.510-25M
.015" 3900 10 feet TPK.515-10FT 5 m TPK.515-5M
25 feet TPK.515-25FT 10 m TPK.515-10M
100 feet TPK.515-100FT 25 m TPK.515-25M

* Recommended maximum permanent working pressures calculated
  from the burst pressure and the factor 2.5

Top top

1/16" OD PEEK tubing

Tubing ID psi* Feet Product No. Meters Product No.
.002" 7000 10 feet TPK102-10FT 5 m TPK102-5M
25 feet TPK102-25FT 10 m TPK102-10M
100 feet TPK102-100FT 25 m TPK102-25M
.003" 6800 10 feet TPK103-10FT 5 m TPK103-5M
25 feet TPK103-25FT 10 m TPK103-10M
100 feet TPK103-100FT 25 m TPK103-25M
.004" 6700 10 feet TPK104-10FT 5 m TPK104-5M
25 feet TPK104-25FT 10 m TPK104-10M
100 feet TPK104-100FT 25 m TPK104-25M
.005" 6700 10 feet TPK105-10FT 5 m TPK105-5M
25 feet TPK105-25FT 10 m TPK105-10M
100 feet TPK105-100FT 25 m TPK105-25M
.006" 6500 10 feet TPK106-10FT 5 m TPK106-5M
25 feet TPK106-25FT 10 m TPK106-10M
100 feet TPK106-100FT 25 m TPK106-25M
.007" 6400 10 feet TPK107-10FT 5 m TPK107-5M
25 feet TPK107-25FT 10 m TPK107-10M
100 feet TPK107-100FT 25 m TPK107-25M
.010" 6100 10 feet TPK110-10FT 5 m TPK110-5M
25 feet TPK110-25FT 10 m TPK110-10M
100 feet TPK110-100FT 25 m TPK110-25M
.015" 5500 10 feet TPK115-10FT 5 m TPK115-5M
25 feet TPK115-25FT 10 m TPK115-10M
100 feet TPK115-100FT 25 m TPK115-25M
.020" 5000 10 feet TPK120-10FT 5 m TPK120-5M
25 feet TPK120-25FT 10 m TPK120-10M
100 feet TPK120-100FT 25 m TPK120-25M
.030" 3800 10 feet TPK130-10FT 5 m TPK130-5M
25 feet TPK130-25FT 10 m TPK130-10M
100 feet TPK130-100FT 25 m TPK130-25M
.040" 2600 10 feet TPK140-10FT 5 m TPK140-5M
25 feet TPK140-25FT 10 m TPK140-10M
100 feet TPK140-100FT 25 m TPK140-25M
.055" 800 10 feet TPK155-10FT 5 m TPK155-5M
25 feet TPK155-25FT 10 m TPK155-10M
100 feet TPK155-100FT 25 m TPK155-25M

* Recommended maximum permanent working pressures calculated
  from the burst pressure and the factor 2.5

Top top

1/8" OD PEEK tubing

Tubing ID psi* Feet Product No. Meters Product No.
.060" 3600 10 feet TPK260-10FT 5 m TPK260-5m
25 feet TPK260-25FT 10 m TPK260-10m
100 feet TPK260-100FT 25 m TPK260-25m

* Recommended maximum permanent working pressures calculated
  from the burst pressure and the factor 2.5

TOLERANCES

Tubing
OD 		OD
(±) 		ID
(±)
360 µm .001" .0005"
1/32" .001" .001"
1/16" .001" .001"
1/8" .003" .003"

MAX. RECOMMENDED WORKING TEMP.

< 100°C (continuous) for 1/16" OD tubing with ID up to .75 mm

CUSTOM PEEK TUBING

We now offer PEEK tubing custom- manufactured to meet your specific OD, ID, and color requirements. The OD range is .014" (360 micron) to 1/8", with a minimum ID of .002" for tubing up to 1/16" OD. (Maximum ID varies according to the OD.) Color coding can be solid or striped. For more information, contact us.

TRADEMARK

PEEK is a registered trademark of Victrex.